AIC Primer Bond Coat
AIC Primer Bond Coat is a "Just Add Water" Resurfacing blend made with Ultra Surface polymer, whiite cement and fine silica sand.
Our Price:
$45.00
|
Concrete Colorcoat
A water-based colorcoat material used to provide a uniform color over the Ultra Surface Polymer Concrete Broom Finish and Trowel Knockdown Texture applications. Excellent resistance to fading, available in 30 colors
|
Concrete Polymer
Concrete Polymer – A liquid concentrate to be mixed with water, cement and sand. Makes Ultra Surface Polymer Concrete for repairing, resurfacing, texturing and stamping in thin applications over existing surfaces.
|
Integral Color Packs
Pre-measured integral colors to add to Resurfacer, Spray-Top and 1/4" Stamping Bag Mixes. For Spray-Top and Resurfacer, add 2 paks per bag. For 1/4" Stamping add 1 pak per bag.
|
Integral Color Pigment 5 lb. pail
Integral Color Pigment – Powder pigment to be mixed with Ultra Surface Polymer Concrete to provide color throughout the mix. Less expensive than Integral Color Paks, but must measured yourself. Available in 30 colors.
|
Sealcoat 1000
A clear water-based sealer used over the Colorcoat 100 and Ultra Surface Polymer Concrete texture coat applications. Provides extra stain resistance against dirt, oil and tire marks on driveways and walkways.
|
Spray or Broom Texture Overlay "Just add water" Blend
AIC's Texture Overlay ready to use blend is ideally suited for Spray Texture or Broom finish applications.
Our Price:
$35.00
|
WB Urethane 2A:1B Gloss and Satin
A clear, two component water-based urethane for indoor and outdoor polymer concrete, acid stain or dye applications where no odor can be tolerated. Can be applied over Sealcoat 1000, Concrete Colorcoat or WB Epoxy. Available in gloss and satin.
|
SEARCH 
