1/4" to 1/2" 250 sq. ft. Stamped Overlay Kit
All of the materials needed to apply 250 SF of 3/8" Stamped overlay to completion. (Excludes tools and stamping skins)
Our Price:
$581.00
|
Acrylic Urethane Clear
A two component, clear, indoor / outdoor urethane used as a topcoat sealer over Ultra Surface Polymer Concrete ¼” Stamping, Spray-Top and Acid Stain applications. Provides a high gloss, durable finish.
|
AIC 1/4" to 1/2" Stamped Overlay Mix
AIC 1/4” to 1/2" Stamped Overlay Mix – A pre-mixed 50lb. bag of white cement, Ultra Surface Polymer and silica sand ready to be mixed with water. Used for ¼” to 1/2" Stamping applications.
Our Price:
$28.00
|
AIC Concrete Resurfacing Manual
Contains step-by-step instructions with pictures on Surface Preparation, Crack Repair, Patching, Resurfacing textures: Broom, Spray, and Stamped overlay..
|
AIC Primer Bond Coat
AIC Primer Bond Coat is a "Just Add Water" Resurfacing blend made with Ultra Surface polymer, whiite cement and fine silica sand.
Our Price:
$45.00
|
Antiquing Color Powder
Antiquing Color Powder - Mixed with Ultra Surface Liquid Release Agent and sometimes Stamped Concrete Sealer and Acrylic Urethane to provide antique highlight colors over stamped concrete applications.
Our Price:
$28.00
|
Concrete Polymer
Concrete Polymer – A liquid concentrate to be mixed with water, cement and sand. Makes Ultra Surface Polymer Concrete for repairing, resurfacing, texturing and stamping in thin applications over existing surfaces.
|
Dry Grouting Mix
For grouting Ultra Surface Polymer Concrete 1/4"” Stamping applications. Applied as a dry powder using a stand-up sponge squeegee and then sprayed with water. Faster than regular grouting methods. Great for brick patterns.
Our Price:
$50.00
|
Integral Color Packs
Pre-measured integral colors to add to Resurfacer, Spray-Top and 1/4" Stamping Bag Mixes. For Spray-Top and Resurfacer, add 2 paks per bag. For 1/4" Stamping add 1 pak per bag.
|
Integral Color Pigment 5 lb. pail
Integral Color Pigment – Powder pigment to be mixed with Ultra Surface Polymer Concrete to provide color throughout the mix. Less expensive than Integral Color Paks, but must measured yourself. Available in 30 colors.
|
Liquid Release Agent
Liquid Release Agent - Sprayed over Ultra Surface Polymer Concrete prior to stamping to prevent the stamps from sticking to the surface. Also can be mixed with Antiquing Color Powder to add highlight colors over stamping applications.
|
Polymer Concrete Retarder
Slows down the drying time of Ultra Surface Polymer Concrete 1/4” stamping, spray-top and patching mixes. Helps keep the mix fresh in the mixing container until ready to use. Recommended in temperatures above 70 degrees.
Our Price:
$42.00
|
SEARCH 
